Configuring reactjs and relay 2019 version

Recently GraphQL started to gain attention from the open source community as a production ready platform focused on the communication between client and server. One of the advantages of GraphQL over REST is how the data is fetched from server to client, avoiding over fetching as well as under fetching.

Relay is an open source library that abstracts away the data fetching from the developer and offers a render component to the developer. Though, to configure relay and reactjs a few steps are needed. Even when following the official realy documentation to get up and running with React, problems can pop up.

The text follows with the reactjs set up using the create react app, then the relay configuration is presented guided by the relay official documentation and in conclusion the solution with the eject react app is presented.

  • Disclaimer: To follow along NodeJs 10.* is a must as well as NPM 6.*.
  • Disclaimer 2: The following of this text assumes that a graphql server up and running on localhost port 4002.
  • Disclaimer 3: The text assumes general knowledge in handling terminal commands.

Despite previous attempts to setup reactjs and relay without ejecting the create react app [7][8], the approach to such options shows to not be effective as, the application created by create react by does not understand the configuration required for relay to work.

The relay.config.js pointed by [7] demonstrates that the reactjs app has difficulties to interpret the configuration file, leading to a broken application state.

In the same sense [8] provides three different alternatives to setup relay and reactjs, which the third options elaborates more on how to use relay without ejecting. This approach as the previous one mentioned leads to a broken state application.

Setting up ReactJs

Create react app [1] is a opinionated tool that comes with webpack configuration and scripts abstracted away from the developer, providing good defaults. Creating an app react based with create react app takes two steps:

  1. Install create react app package (npm i -g create-react-app)
  2. Executing the create react app (create-react-app relay-app)

Once the command from step 2 is done the react app is available in the relay-app folder, make sure to move to that directory before proceeding with the command cd relay-app.

With the based app setup, the next step is to install all libraries required by relay to work.

npm i get-graphql-schema relay-compiler babel-plugin-relay --save-dev && npm i graphql react-relay --save

get-graphql-schema [2] is a tool used for generating the graphql schema from a given graphql server.

relay-compiler [3] is used to convert graphql literals into generated files that live alongside your source files. This approach facilitates the usage of relay into reactjs project, preventing developers to write those files themselves. babel-plugin-relay is related as well, as it converts graphql to runtime artifacts - without this plugin is not possible to run relay in the browser.

At this stage a check point would help to make sure that the dependencies have been installed and they are working as expected. For that, in the package.json file add the following scripts [4]:

{
  "scripts": {
    "export-schema": "get-graphql-schema http://localhost:4002 > ./schema.graphql",
    "relay-compile": "relay-compiler --src=./src --schema=./schema.graphql --artifactDirectory=./src/__generated__",
    "relay": "npm run export-schema && npm run relay-compile"
  }
}

The script export-schema uses the library get-graphql-schema to fetch the schema definitions the the graphql server exposed at localhost:4002. The schema.graphql file is needed for the relay-compiler package in order to generate the query definitions.

relay-compile generates the metadata used by relay to query the graphql server. In this command the files and code generated are stored under src/__generated__.

Finally, the relay script is used as a shortcut to execute export-schema and relay-compile in sequence.

Once the scripts have been added, the last step is to run the script relay. For that in the terminal run the following command:

npm run relay

The output should be something like the following:

> [email protected] relay /Projects/graph-ql/relay-app
> npm run export-schema && npm run relay-compile


> [email protected] export-schema /Projects/graph-ql/relay-app
> get-graphql-schema http://localhost:4002 > ./schema.graphql
`

> [email protected] relay-compile /Projects/graph-ql/relay-app
> relay-compiler --src=./src --schema=./schema.graphql --artifactDirectory=./src/__generated__

HINT: pass --watch to keep watching for changes.

Writing js
Unchanged: 0 files

The last line should reflect the project lack of graphql files, as in the last line it shows Unchanged: 0 files, which in this case is the desired behavior.

Setting up relay environment

Relay requires an environment setup to work properly [5]. The environment provided by the official documentation is the one used here. Copy the following code and save it in a file called environment.js.

import {
  Environment,
  Network,
  RecordSource,
  Store,
} from 'relay-runtime';

function fetchQuery(
  operation,
  variables,
) {
  return fetch('/', {
    method: 'POST',
    headers: {
      'Content-Type': 'application/json',
    },
    body: JSON.stringify({
      query: operation.text,
      variables,
    }),
  }).then(response => {
    return response.json();
  });
}

const environment = new Environment({
  network: Network.create(fetchQuery),
  store: new Store(new RecordSource()),  
});

export default environment;

Next, comes the relay component to interact with the graphql server. The component used here is a react functional component that creates a list of products (file named ProductList.js). The point of attention here is the environment usage defined previously, followed by the query variable that holds the graphql query. The graphql query is passed to the QueryRenderer [6] relay component to fetch the graphql data.

// ProductList.js
import React from 'react';
import {graphql, QueryRenderer} from 'react-relay';
import environment from './environment';

const query = graphql`
query ProductListQuery {
  products {
    title
    image_link
  }
}`;

const ProductListQuery = () =>
  <QueryRenderer
    environment={environment}
    query={query}
    render={RenderProductList}
  />;

export const RenderProductList = ({ error, props }) => {
  if (error) {
    return (<div style=>{error.message}</div>);
  }

  if (props) {
    return props.products.map((item, index) =>
      <div
        key={index}
      >
      </div>
    )
  }

  return <div>Loading</div>;
}

export default ProductListQuery;

The ProductList component is based on the component provided by the relay official documentation [6]. To actually use the ProductList component one more step is required: to invoke the component in the App.js file, as the following code does.

import React from 'react';
import ProductList from './ProductList';
import './App.css';

function App() {
  return (
    <div className="App">
      <ProductList />
    </div>
  );
}

export default App;

Once the code is in place, the expected behavior is to it to work, as the basic setup is completed. Unfortunately it doesn’t. Trying to run the code with the setup made so far throws an exception.

graphql: Unexpected invocation at runtime. Either the Babel transform was not set up, or it failed to identify this call site. Make sure it is being used verbatim as `graphql`.

Error babel trying to execute relay without eject

The alternative solution proposed is to eject the reactjs app created with the create react app, the next section dives in details in how to achieve it.

The solution ejecting reactjs

The solution for that is to eject the reactjs project running the command: npm run eject. Followed by changing the babel configuration used. The eject command reveals the magic behind the create react app, which results in more configuration files in the root directory and more scripts/dependencies in the package.json file.

The next step is to create a new file named .babelrc in the root of the project and add the following content:

{
  "presets": [
    "react-app"
  ],
  "plugins": [
    [
      "relay"
    ]
  ]
}

To prevent any babel configuration conflict, remove the section babel inside the package.json file, and then, run again the command npm run relay to generate all required files by relay, this time time output should be something like the following:

> [email protected] relay /Projects/relay-app
> npm run export-schema && npm run relay-compile


> [email protected] export-schema /Projects/relay-app
> get-graphql-schema http://localhost:4002 > ./schema.graphql


> [email protected] relay-compile /Projects/relay-app
> relay-compiler --src=./src --schema=./schema.graphql --artifactDirectory=./src/__generated__

HINT: pass --watch to keep watching for changes.

Writing js
Created:
 - ProductListQuery.graphql.js
Unchanged: 0 files

Relay compiler is going to create one file, which is linked with the graphql query in the ProductList component.

At this point, starting the app with the command npm run start should start the reactjs app and realy should be up and running as well.

References

[1] Create React App - Set up a modern web app by running one command [Online]. Available: https://create-react-app.dev. [Accessed: 31 - Dec - 2019]

[2] Fetch and print the GraphQL schema from a GraphQL HTTP endpoint [Online]. Available: https://github.com/prisma-labs/get-graphql-schema. [Accessed: 31 - Dec - 2019]

[3] Set up relay-compiler [Online]. Available: https://relay.dev/docs/en/installation-and-setup#set-up-relay-compiler. [Accessed: 31 - Dec - 2019]

[4] How npm handles the “scripts” field [Online]. Available: https://docs.npmjs.com/misc/scripts. [Accessed: 31 - Dec - 2019]

[5] Relay environment [Online]. Available: https://relay.dev/docs/en/quick-start-guide#relay-environment. [Accessed: 31 - Dec - 2019]

[6] Rendering GraphQL Queries [Online]. Available: https://relay.dev/docs/en/quick-start-guide#rendering-graphql-queries. [Accessed: 31 - Dec - 2019]

[7] Set up Relay with a single config file [Online]. Available: https://relay.dev/docs/en/installation-and-setup#set-up-relay-with-a-single-config-file. [Accessed: 01 - Jan - 2020]

[8] Using Create React App with Relay Modern [Online]. Available: https://hackernoon.com/using-create-react-app-with-relay-modern-989c078fa892. [Accessed: 01 - Jan - 2020]

Share this on